Home | Colleges | Contact Us


Enter College / University Name or City:
  Andhra Pradesh

Colleges
Other Institutes
Home > Andhra Pradesh > Engineering > Hyderabad (Secundrabad) > Central Institute of Tool Design (CITD)


Central Institute of Tool Design (CITD), Hyderabad (Secundrabad), Andhra Pradesh



Contact


Central Institute of Tool Design (CITD), Hyderabad (Secundrabad), Andhra Pradesh
Address:Balanagar
Hyderabad (Secundrabad) (District Hyderabad (Secundrabad))
Andhra Pradesh, India
Pin Code : 500037


Central Institute of Tool Design (CITD), Hyderabad (Secundrabad) Andhra Pradesh is a recognised institute / college. Central Institute of Tool Design (CITD), Hyderabad (Secundrabad) Andhra Pradesh was established on / in 1968.


Central Institute of Tool Design (CITD), Hyderabad (Secundrabad) Andhra Pradesh is situated in Hyderabad (Secundrabad) of Andhra Pradesh state (Province) in India. This data has been provided by www.punjabcolleges.com. Hyderabad (Secundrabad) comes under Hyderabad (Secundrabad) Tehsil, Hyderabad (Secundrabad) District.

Fax # of Central Institute of Tool Design (CITD), Hyderabad (Secundrabad) Andhra Pradesh is +91-40-23772658.

email ID(s) is Central Institute of Tool Design (CITD) Hyderabad (Secundrabad) Andhra Pradesh

Website of Central Institute of Tool Design (CITD), Hyderabad (Secundrabad) Andhra Pradesh is http://www.citdindia.org.


Contact Details of Central Institute of Tool Design (CITD), Hyderabad (Secundrabad) Andhra Pradesh are : Telephone: +91-40-23772747, 2748, 2749, 6178


Courses

Master Certificate in Computer Aided Engineering - (MCTE)
Master Certificate in CAD / CAM - (M-CAD/CAM)
Mechanical CAD/CAM
Mechanical CADD
Computer Aided Engineering (CAE)
Advanced CAD / CAM
Advanced FEA / FEM
Integrated Course


Central Institute of Tool Design (CITD), Hyderabad (Secundrabad) Andhra Pradesh runs course(s) in Computer Engineering stream(s).

Profile of Central Institute of Tool Design (CITD)

Established in 1968 by the Govt. of India with the assistance of UNDP and ILO, is a poineering Institution in the field of Tool Engineering in the Country. The Institute was initially established as an United Nations Development Programme (UNDP) Project and was executed by International Labour Organisation (ILO). The Precision machinery and equipment was donated by UNDP and the faculty were trained abroad in the area of Tool Engineering. The UNDP Experts stayed at CITD for about 5 years and trained officers, faculty and staff of CITD in manufacture and design of tooling. The main objectives of the institute are:
Training of the technical personnel in Designing and Manufacture of Tools, Dies and Moulds.

Design and Manufacture of dies, jigs, fixtures and guages, etc.

Provision of advisory services to Small Scale Units including assistance in design and developing tools for various processes.

Recommending measures to standardise components for dies, jigs and other tools.

Introduction
Central Institute of Tool Design(CITD) established in 1968 by the Govt. of India with the assistance of UNDP and ILO, is a poineering Institution in the field of Tool Engineering in the Country. The Institute was initially established as an United Nations Development Programme (UNDP) Project and was executed by International Labour Organisation (ILO). The Precision machinery and equipment was donated by UNDP and the faculty were trained abroad in the area of Tool Engineering. The UNDP Experts stayed at CITD for about 5 years and trained officers, faculty & staff of CITD in manufacture and design of tooling.

CITD conducts several regular and part-time training programmes in the field of Tool Design & Manufacture, Low Cost Automation, Mechatronics and Computer Aided Design & Computer Aided Manufacture for the benefit of National & International participants. It also conducts Short-term courses, Special Purpose Clinics in Tool Engineering, Seminars, Tailor-made programmes, in various disciplines for the benifit of working personnel.

Central Institute of Tool Design(CITD) established in 1968 by the Govt. of India with the assistance of UNDP and ILO, is a poineering Institution in the field of Tool Engineering in the Country. The Institute was initially established as an United Nations Development Programme (UNDP) Project and was executed by International Labour Organisation (ILO). The Precision machinery and equipment was donated by UNDP and the faculty were trained abroad in the area of Tool Engineering.

Apart from training, CITD has been making significant contribution in meeting the needs of industries in design and manufacturing of quality tools. CITD provides full-fledged consultancy and servicing facility to large , medium and small scale industries in the country. This includes assistance in design and development of tools for various purposes and it also recommends measures to standardise tools and tooling elements, components of jigs & fixtures, Dies and Moulds and other tools. CITD is a member on various technical committees of Bureau of Indian Standards.

The main objectives of the institute are:
Training of the technical personnel in Designing & Manufacture of Tools, Dies & Moulds.
Design & Manufacture of dies, jigs, fixtures and guages, etc.
Provision of advisory services to Small Scale Units including assistance in design and developing tools for various processes.
Recommending measures to standardise components for dies, jigs and other tools.

The long-term and short-term training programmes conducted by the Institute have acclaimed good reputation among the indian industry and the trainees are absorbed by the industry through campus interviews during the period of their training at the institute.

Further details can be had at:
CENTRAL INSTITUTE OF TOOL DESIGN
(A Government of India Society Ministry of SSI)
Balanagar, HYDERABAD - 500 037, INDIA


About Us
Central Institute of Tool Design(CITD) established in 1968 by the Govt. of India with the assistance of UNDP and ILO, is a poineering Institution in the field of Tool Engineering in the Country. The Institute was initially established as an United Nations Development Programme (UNDP) Project and was executed by International Labour Organisation (ILO). The Precision machinery and equipment was donated by UNDP and the faculty were trained abroad in the area of Tool Engineering. The UNDP Experts stayed at CITD for about 5 years and trained officers, faculty & staff of CITD in manufacture and design of tooling. The main objectives of the institute are:
Training of the technical personnel in Designing & Manufacture of Tools, Dies & Moulds.

Design & Manufacture of dies, jigs, fixtures and guages, etc.

Provision of advisory services to Small Scale Units including assistance in design and developing tools for various processes.

Recommending measures to standardise components for dies, jigs and other tools.


Location
CITD is centrally located in Hyderabad, the capital city of Andhra Pradesh state in INDIA. The twin cities of Hyderabad & Secunderabad are easily accessible by air/road/rail from all parts of the country. The climate is normal and pleasant almost throughout the year. This is a cosmopolitan city. Good hotels and restaurants cater to the food requirements of different people coming from various countries.

GUIDANCE TO REACH BALANAGAR
Point No. 1 SECUNDERABAD RAILWAY STATION
Alighting at Secunderabad Railway Station is preferred since Bus frequency is more. Bus route Nos. 29, 30, 31, 271 & 272, 230K, 226.
Point No. 2 NAMPALLY (HYDERABAD) RAILWAY STATION
(Bus Stop is near Public Garden Gate) Bus Route Nos. 9, 9M & 189 reaching Balanagar Bus Terminus

CITD is about 12km. from Nampally (Hyderabad) or (Secunderabad) Auto services are available.

Library
LIBRARY : CITD has a full-fledged special library with a collection of 4000 technical books on various disciplines of Tool engineering and allied subjects. CITD has published 250 books on related subjects prepared by ILO Experts and CITD Faculty. CITD is the member of many professional bodies such as American Society for Metals, Die Casting Society of India, Indian Society of Tool Engineers, Indian Standards Institution, Indian Society of Manufacturing Engineers, Indian Society for Technical Education, Fluid Power Society of India. The Library has got standards, reports, films, photostat documents for reference. The Library subscribes to National and International periodicals for the benifit of trainees & clientele.

For effective functioning of the Tool Room, better performance of the Faculty in their respective classes and the relevant machines, the library is the living agency which feeds them with selective dissemination of knowledge in right time with right technical literature. This library is open for reference to all interested engineers.

DOCUMENTATION CENTRE : The documentation centre is the recent addition to the CITD. This has started functioning from 1984 onwards. Subscription is made to about 29 National and International periodicals in the field of tooling (tool design & manufacture). The documentation provides abstract service to the industry/faculty/trainees with the selective dissemination of knowledge in the field of tool design and tool manufacture. The facilities of library/documentation is open for reference to all interested engineers including trainees/faculty and personnel from industry.


Facilities
CITD is equipped with latest Metrology facilities like -
Computerised 3D Coordinate Measuring Machine
Universal Measuring Machines
Optical Profile Projector
Surface Roughness Measuring Machine
Height Masters, etc., and undertakes inspection of Tools/Components
CNC - 3D Co-ordinate Measuring Machine
CNC - 3D Co-ordinate Measuring Machine
SIP (UMM)
Profile Projector
Aristo - Co- ordinatograph
Surface Roughness Measuring Machine


Activities
CITD conducts several regular and part-time training programmes in the field of Tool Design & Manufacture, Low Cost Automation, Mechatronics and Computer Aided Design & Computer Aided Manufacture for the benefit of National & International participants. It also conducts Short-term courses, Special Purpose Clinics in Tool Engineering, Seminars, Tailor-made programmes, in various disciplines for the benifit of working personnel.

Apart from training, CITD has been making significant contribution in meeting the needs of industries in design and manufacturing of quality tools. CITD provides full-fledged consultancy and servicing facility to large , medium and small scale industries in the country. This includes assistance in design and development of tools for various purposes and it also recommends measures to standardise tools and tooling elements, components of jigs & fixtures, Dies and Moulds and other tools. CITD is a member on various technical committees of Bureau of Indian Standards.

Stuff



Images / newspaper cuttings related to Central Institute of Tool Design (CITD)

Supply of raw materials (Central Institute of Tool Design (CITD))
Tender: 3rd January, 2014
Supply of raw materials
Installation of Dual Pallet system (Central Institute of Tool Design (CITD))
Tender: 14th December, 2013
Installation of Dual Pallet system

Supply of Pneumatics Training Kit (Tender)
PG Course in Tool and Die (Admission Notice)
Autocad Course and VHDL etc (Advertisement)


Some other Colleges in Andhra Pradesh
REMAN COLLEGE OF EDUCATION, Sangareddy
SANGAREDDY REVENUE DIVISION, # 6-1-162, OLD BUS STAND,
Sangareddy (District Medak)
Andhra Pradesh
Dr Sudha and Nageswara Rao Institute of Dental Sciences, Gannavaram
Chinna Avutapalli
Gannavaram (District Krishna)
Andhra Pradesh
Indira Priyadarshini College of Nursing, Kadapa (Cuddapah)
4/10, Nagarajpet
Kadapa (Cuddapah) (District Kadapa (Cuddapah))
Andhra Pradesh
Malla Reddy Institute of Technology, Hyderabad (Secundrabad)
Maisammaguda, Dhulpally(Post Via Hakimpet)
Hyderabad (Secundrabad) (District Hyderabad (Secundrabad))
Andhra Pradesh
Jangaon College of Education, Nidigonda
Plot No : 625/A
Jersey Milk Centre
Nidigonda (District Warangal)
Andhra Pradesh
© www.punjabcolleges.com : Engineering Colleges and deemed Universities in India      Disclaimer